Don't have an account yet? You can create one. As a registered user you have some advantages like theme manager, comments configuration and post comments with your name.|
Lost your password?
| Just For Fun|
The Beastess at World SuperBike support at Phillip Island.||
Historic support races at World Super Bikes, Phillip Island, February 2016.
Our last race meeting, 4 weeks prior, was the International Challenge at the Island Classic. The Beastess was playing up in the mid range. Trev reckoned it was like a coil dropping 2 cylinders and then kicking back in. At the event we couldn't find a spark issue, so we continued with the carb settings., but we didn't get her any better over that event.
We thought that smaller pilot jets may help. So I changed the 70's for 50's, then put her back on the dyno and made main jet and needle position and mixture screw changes. She appeared close, by Wednesday morning, but it was now time to pack up and load the truck and head to the Island. She was still showing rich, but figured we'd sort the fine tuning at the track.
By the time the truck was loaded, it was about 8pm when Trev and I headed off. (Karen and Jake were coming down early Thursday morning as they were working for Computime.) Arriving just outside the side road to the track about 10pm, we sat up for a couple of hours, chewing the fat and partaking in a beer or 2. Then try to sleep.
The plan was to walk around to the credentials office, by 8am Thursday morning and pick up our passes (Karen and Jake were there by then) and then walk back to the truck and prepare to go in through the side gate at 9.15am. The main entrance wasn't going to be open until 10am and trucks were allowed in earlier to position themselves near their pit garage, before the hundreds of cars and trailers came in. We were starting to sweat, as 9.30am had come and our gate wasn't open and we wanted to get the 19 metre semi, in before the rest, so we could manoeuvre. Well about 9.50am the gate was opened and we got in and managed the slot spot just outside our pit garage.
Well in our section we were put in a garage with 2 other bikes and we had 2, so it was going to be squeezy to work on the bikes. There were a few spare garages in our section, so we moved next door and had one garage to ourselves.
Trev and I unloaded the bikes and gear and then set about running a power lead to the truck.
A bit tricky, but we made up a mast and screwed it to the side of the shed and ran it about 20 metres to Trev's truck exhaust. It ended up being about 4.5 metres off the ground, so no tripping hazard and trucks could fit under it. We had to do it in stages as the pit marshall was down the other end. Once it was up, she was happy. So now we had power to the truck for the fridge, (most important!) and the air conditioner. A nice place to relax when not working on the bikes.
I did a bit of work on the bikes and fitted new crash protectors to the head, whilst Trev went to riders briefing. (I usually go to riders briefing with Trev, but knowing this Clerk of Course, I knew it would be a marathon briefing.) Then scrutineering, where they were more interested in frame numbers than other safety issues. I told them that the powder coating of the frame had pretty much filled up the frame number and what was the big deal? They said that they wanted to see that I hadn't had a log book for a certain frame and then fitted a non period frame. Anyway, that was all ok, so back to the pit garage and fit the tyre warmers, as Trev was out on Track in about an hour, at 3.15pm, for a 1/2 hour free practice.
The plan was that I would wait in pit lane and Trev would cut a couple of laps and come in and try some changes and then head out again. Twice he came in for rear suspension changes and he told me that she still had the midrange stutter. The 3rd time he came in, he thought that the engine was running rougher. He shut her down and got off. I started pushing the bike back to our pit and I thought that it was still in gear.
When looking down to change gear with my hand, I noticed a lump on the side of the rear tyre. I showed Trev. No wonder he thought that the engine was running rough, as this lump was about the size of 1/2 a tennis ball and as thin as a balloon, rubbing on the chain. It could have burst any second, had he not come in. Very lucky!
The tyre had done 6 races and a qualifying, so was 3/4 worn, but I needed to take it back to the tyre man and find out why it had occurred. A blown tyre could have been disastrous, so I was ready for a bit of a confrontation with the tyre guy. He looked at it and took some photos, then took it off the rim. He explained that once in a blue moon an air bubble can get in the inside layer. The whole way around the inside of the tyre had a line around where it had delaminated and the bulge must have been the weak spot. A brand new tyre was fitted, free of charge, so I was pretty happy with the service.
We still had a 15 minute practice at 8.50am on Friday morning and so we fitted an old tyre, with the aim of keeping the new tyre for racing. Gave The Beastess the once over , fitted a 20 tooth front sprocket, to see if we could avoid the midrange hiccup and then into Cowes, to get some beer and back to the unit, for a reasonable nights sleep.
Saturday mornings practice session was only short, but before Trev went out, we decided to retard the ignition around the 4500 to 5000 rpm mark and take a couple more clicks off the low speed comp on the rear shock. The engine surge was still there, but the handling was better.
So we had from 9.15 am until 5 pm (when our qualifying was), to have a muck around with the carbs and the electricals. We leaned the needles off one notch, but she was still showing rich. Next step was to see if we had a faulty coil around the 4500 rpm mark. We did! So that was a positive. We wired in a different coil and she ran better but not right just yet. Then we swapped the 2 spark plugs that belonged to the coil and she was better. Then we went back to the lap top and down loaded the map that we used with the 1233 engine at the Australian Titles in October. She instantly sounded better around the midrange and were reasonably confident that we'd have a better set up for qualifying.
Qualifying time and Trev dropped 2 seconds. The engine was better, but now too lean on the needle and the gearing too high.
So we lifted the needle one notch and fitted the 19 tooth front sprocket and checked her over , pushed the exhausts in another 1/4" and take one click off comp and we were ready for tomorrows races.
By now we had the A team here, as Chris and Dave had arrived, and we were pretty confident of bettering the midfield grid position.
Into town and a bit of team work as Trev and Dave went to the grog shop and Chris and I picked up the Pizzas and then met back at the unit. A healthy dinner and the usual bench racing and in bed by midnight. Up at 6 am at the track by 7.30 am and ready for race one at 8.50 am.
Fired up the bike and then refitted the tyre warmers and we were set. Trev had qualified 12th, on a 3 wide grid, so he was on the 4th row. The siren went , so the plan was get Trev going and Chris and Dave would walk over to turn 4 (Honda corner) and I would jump on the scooter and buzz around to turn 1 to watch.
Trev got a good start and had passed one guy in turn 1, but coming out of turn 2, 2 had passed him, (One day we'll have more than 110 hp.), but around Stoner corner, (turn 3) Trev was reeling them in. I was thinking that we were finally getting close with the handling as she had always been a handful around the high speed bends, but Trev was holding her flat. Come turn 4, he gained some more under brakes. A strong point is the brakes and the front end and with some big balls, The Beastess is pretty impressive in this situation. From Honda corner on, the bigger powered and lighter machines pulled away. The next lap, when Trev came in sight he had lost a bit of ground on the straight, but had closed on the 3 in front, through turn 3, with a plan to smash them on the brakes into turn 4. He flew past 2 and then I lost sight. I heard on the commentary that one bike had gone down, Shit I thought. Then the commentator said it was 666. The race was red flagged and, I jumped on the scooter and headed back to our pit.
Trev had been carted to the medical centre and I went to the scrutineering bay to pick up The Beastess. Well there didn't look like a lot of damage to the bike, so I hoped it would be the same for Trev. We waited a while for the medical diagnosis of a probable broken collar bone and ribs. They decided to send him by Ambulance to Melbourne, where he stayed a couple of nights.
Well there was nothing that we could do for Trev, so we packed up some gear and watched some of the racing.The World SuperBike racing was awesome, with the first 6 so close you could throw a blanket over them,
Saturday night I shouted out the team to a restaurant, where we ate drank and sent photos to Trev. You know the sort of things that mates do! Wink
Sunday we slept in, as there was no hurry to get to the track. We cleaned the unit and then to the track, where we packed up the pit and then watched some racing.
Sunday arvo we heard from Trev, who confirmed his injuries and said he would be out of Hospital on Monday.
Tuesday arvo, Trev called in home and said that he will be giving the racing away. I suspected that may be the case. Although he is still a great racer, he is pushing 60 and at that age you don't repair as well as you once did. He was very happy with how The Beastess was handling and he is keen to help with the power development. So we'll be taking a break for a while and will rebuild and repair The Beastess and try some new engine mods. Trev's aim is to still be test rider, whilst we continue to develop, but hand over the reins to someone else. So at this point in time, I'd say that this year will be for development and we'll be aiming on bringing out the new improved Beastess at the Island Classic in January 2017.
Thanks to our Team of Karen , Jake, Dave, Chris and Little Stevie and of course Trev.
Our sponsors, Ford McKernan Engineering, Pipemasters, Lilydale Sheetmetal, PowerHouse Clearances W.A, Airvolution Kustom Art, TM Performance / Shocktech and not to forget our hundreds of supporters all around the World.
ICOA Summer Rally June 1 to June 5, 2016 in North Carolina||
The ICOA has put together an ICOA club rally for this coming Summer. The location will be in the western mountain/hill country of North Carolina and the Rally will be centered in the town of West Jefferson, NC.
June 1 to June 5, 2016
West Jefferson, North Carolina
Holiday Inn Express - phone 336-846-4000 and the hotel rates are $99/night for Wednesday and Thursday and $129/night for Friday and Saturday. Ask for CBX Group. We have blocked 15 rooms and if we get a heavier response, we can go for more rooms, but our absolute cut-off date is May 1, 2016. If you wish to attend, please book your reservations soon.
Larry Zimmer and John Flake will be planning and preparing rides for sight-seeing and also rides for trying to twist the frames of our CBX's. West Jefferson is close to the Virginia and Tennessee borders, and for those of you who definitely want to twist the frame on your CBX, the Dragon is close by.
PM me if you have any questions or comments and thanks to all for looking. Hope to see you there.
2015 ICOA National Rally close to the Tail of the Dragon||
Read all about it !!
The National Rally for the ICOA will be held June 18th-21st.
Location: Fontana Village Resort. A little upmarket but come on, you know you're worth it!
Click Here for Fontana Village
This rally site is only a few miles from the Tail of the Dragon, the Cherohala Skyway and other awesome breathtaking roads.
As it is already getting late, please help us get the word of this event out to as many CBX'ers that may be interested in attending. There will be rides, there will be a bike show, there will be awards, there will be good company, good times and I have it on good authority, good weather! In order to reserve a room please call 1-800-849-2258 and press option #1. Mention group name CBX2015 to secure the special rate we have negotiated --cutoff for this rate is April 9th so don't delay, book now to get these special rally rates. This should be a great rally nestled in the foothills of the Appalachian mountains. There are restaurants and other facilities for everything you could wish for, please visit:
to view all the amenities,facilities and directions to the village. I apologize for the delay in getting this information out, but after a brutal winter on the east coast I am sure we are all ready for some fun in the sun!!
Hope to see many of you there with your CBX's!
Directions: Fontana Village Resort is located in western North Carolina, 20 miles north of Robbinsville on Highway 28 North on the western end of Fontana Lake.
From Knoxville, Tennessee, take Hwy 129 south from Knoxville to Maryville, TN. Just past Maryville, Hwy129 turns left off of the four lane highway. Drive carefully. This section of this route is a beautiful, but curvy mountain road known as the "Dragon" by car & bike enthusiasts. One mile past past the TN / NC state line turn left on Hwy 28 at Deals Gap. Continue on Hwy 28 for 8.6 miles.
For GPS Users
For GPS users, the coordinates to the Lodge for check-in are 35.4364112, -83.822342 35.4364112 -83.822342 N35Â° 26.1847', W083Â° 49.3405' or plug in the following address: 300 Woods Road. Fontana Dam, North Carolina 28733
For engine bore jobs, in the Washington State, Puget Sound/Seattle area,
Quality Outboard Boring & Sleeving
3610 S Rd, Mukilteo, WA 98275
The dates & reservations have been set up at Furnace Creek Ranch Resort for the weekend of April 5th, 6th, 7th, & 8th, 2013, Friday thru Monday respectively.
There are 12 rooms in the Parkside area that have been reserved for us @ $160/nite(peak period, higher rates)plus 12% tax, etc. total cost per night will be $209.20 & 1st night automatically charged to your credit card when you make your reservation.
Call the reservation dept. @ (760)786-2345 & ask for booking #526700 for the CBX group, should be king size or 2 queen beds available.
Looking forward to this next spring!
Any questions, etc. email me at: email@example.com & let me know, keep the shiny side up!
DV13 CBX rally April 5th thru 8th, 2013||
Posted by sr71cbx on Monday, September 10 @ 16:36:32 EDT (6242 reads)|
(comments? | Score: 1)
82 Fuel Injected - Front View
CBX No Pipes
R: 3.40, V:1,306, C: 7
R: N/A, V:417, C: 1
HSR 42 Turbo Idle
R: N/A, V:315, C: 0
R: 5.00, V:911, C: 0
R: 5.00, V:780, C: 4
R: 2.00, V:354, C: 0
Girls on trampolines
R: 5.00, V:877, C: 0
B52 Test Flight
R: 4.00, V:395, C: 7
R: 5.00, V:499, C: 2
R: 4.11, V:862, C: 6
|Sunday, May 13|
|·|| Upcoming CBX rallies for 2012 |
|Saturday, June 26|
|·|| IRISH RALLY 2010 |
|Friday, May 07|
|·|| Reno Nevada 2010 CBX Meet July 23/24 |
|Sunday, March 14|
|·|| Death Valley 2010 CBX Rally |
|Sunday, August 16|
|·|| UK cbxers 82 special stolen. Reward if located. |
|Saturday, March 14|
|·|| The CBX Book |
|Friday, February 20|
|·|| BSA is Marque Of The Year for AMA Vintage Motorcycle Days 2009 |
|Sunday, September 14|
|·|| 2009 WORLD WIDE MEGA CBX RALLY |
|Saturday, February 16|
|·|| AMA concerned about new threat to motorcycle safety training funds |
|Saturday, November 10|
|·|| Randakk's 2008 Customer Appreciation International Vintage Honda Rally |